EL10ZFG Voith Saudi Arabia Sales

for Voith torque converter type EL10ZFG Serial No. 8211096 acc. to Instruction Manual No. 91800204410 Torque Converter  (spare unit) Voith Part No.: 218.000496 Voith adjustable torque converter type EL 10 ZFG for starting the GE gas turbine MS 9001 E by means of an electric motor with an input power of 1416 kW at an input speed of 2950 rpm Unit weight approx.: 1060 kg (without accessories) Designed for: non hazardous area Direction of rotation (seen in direction of power flow): counter clockwise (CCW) In case of an order, please confirm the serial number of the torque converter to be replaced in order to make sure that the units will be interchangeable. For lubrication and cooling an oil flow rate of approx. 0.6 ltr./sec at a pressure of 1.5 bar is to be supplied to the converter by the gas turbine's oil supply system. The torque converter is of drainable design and requires an operating oil flow rate of approx. 16 ltr./sec at a pressure of 7 bar from the gas turbine's oil supply system. i n c l u d i n g - per unit - - 1 Electrical guide vane actuator, make AUMA mounted on the torque converter Designed for 380 & 400 & 415 V AC +/ - 10 %, three-phase, 50 cycles In case the torque converter to be replaced is equipped with an actuator made Siemens: Please note that SIEMENS actuators are not available anymore. The new unit will be supplied with an AUMA actuator, which is slightly different in terms of dimensions and electrical connection. Technical Description This offer comprises the Voith standard scope of supply. Should we receive a specification at a later date, we reserve the right to change the offer in design, scope and price. Design is made according to Voith's standard or relevant DIN, EN and ISO standards. The converter housing is made of grey cast iron with feet for mounting on a base frame. The converter input and output side is equipped with anti-friction bearings. Painting is according to Voith standard D-0250. Our scope of supply includes our instruction and operating manual in PDF format, in English language, electronically transferred. Limits of our scope of supply are the shaft ends and oil connections of our machine. The following is NOT included: - Initial oil filling. - Installation, commissioning or field service. - Connecting elements for mounting the torque converter. - Input and output side connecting couplings and covers over rotating parts as well as any other connecting elements to motor or driven machine - Interconnecting piping or tubing between torque converter and gas turbine's oil system. - Control unit, logic processing of signals as well as electrical wiring. - Special tools for disassembling the torque converter, tackles or lifting equipment. - Starting motor, spare parts, base frame, brackets or similar support structure.